Project first · Size second · Access always
Use this Imperial Beach roll-off dumpster guide to turn a cleanup, remodel, roof, construction phase, landscape tear-out, or heavy-material pile into a clear load plan. Compare five sizes, six quote inputs, and the placement path before sending the address.
Imperial Beach addresses need a current collection-path check before a container is arranged. This page helps compare projects and sizes; it does not confirm delivery to a specific property. Review the City’s Solid Waste & Recycling page before sending the project address.
A city name and a guessed size are not enough. Start with the work, list what is leaving, and identify which part of the load is bulky, dense, separate, or still uncertain.
Furniture, shelving, boxes, household contents, and bagged material usually fill cubic yards before they become a heavy load. Count rooms and bulky pieces instead of estimating from floor area alone.
Compare 15 and 20 yards for focused cleanouts; review 30 and 40 yards for multi-room or whole-property work.
Plan the cleanup →Cabinets and drywall create volume, while counters, tile, mortar, and plaster add density. List every layer coming out so the heavy pieces do not disappear inside a general remodel description.
Start with 20 or 30 yards for general tear-out, then separate any dense-material question.
Review temporary rentals →Shingles, underlayment, decking, siding, fencing, and packaging produce different weight and volume patterns. Estimate roof area, layers, and any wet or damaged sheathing before comparing capacity.
Review material weight before selecting a tall container only from visible pile size.
Open construction guidance →Demolition, framing, rough work, finish work, and packaging do not create debris at the same rate. Tie the container window to the phase that will actually produce the load.
Compare 30 and 40 yards for recurring bulky output; plan swaps or removal around the active work stage.
See project uses →Branches, brush, sod, soil, fencing, planters, and hardscape may need different handling. Describe green material, wood, earth, and masonry separately before combining anything.
Use volume for brush and fencing; review weight first for soil, pavers, and broken hardscape.
Compare all sizes →Clean dense debris can reach a practical weight limit while a container still appears partly empty. Keep eligible concrete, dirt, asphalt, brick, stone, pavers, or tile separate from mixed project waste.
Begin with the exact-material review and the shallow 10 yard lowboy.
Open the lowboy guide →
Keep wood, drywall, metal, tile, mortar, and other dense layers visible in the request. That makes it easier to compare general capacity without losing the weight-sensitive part of the job.
The 15–40 yard cards compare general project capacity. The exact long, shallow 10 yard lowboy begins the clean heavy-material review.
11.5'L × 8'W × 5'H
Medium cleanouts · Small bath remodels · Yard waste
View this size →
11'L × 8'W × 6'H
Construction debris · Roofing tear-offs · Larger cleanouts
View this size →
18'L × 8'W × 6.5'H
Large remodels · Whole-home cleanouts · Commercial jobs
View this size →
18'L × 8'W × 7.5'H
Major construction · Large demolition · Industrial cleanouts
View this size →
18'L × 8'W × 2'H
Heavy materials only · Driveway tear-outs · Excavation & ADU dirt
View this size →
Describe the full project, then separate what fills space, what adds weight, what needs confirmation, and what should stay out until directed.
There is no useful city-only price. The address, load, capacity, weight, time, and access must be reviewed together.
The street address and ZIP begin the route, placement, and current collection-path check.
The selected yardage needs to match the real amount of bulky material.
Household contents, roofing, green waste, mixed construction, and clean dense debris are not interchangeable.
Dense material can change the plan before the container reaches its visual capacity.
Requested delivery, loading, pickup, and possible extension dates belong in one project window.
Gate width, turning room, slope, surface, overhead clearance, and public-space questions affect placement.
Compact coastal lots can make the driveway, gate, parked cars, surface, and exit path as important as the final set-down dimensions.
Mark the private placement and clear the approach before arrival.
Keep material level, below the top rail, distributed safely, and within the reviewed mix.
Move vehicles, unlock gates, secure loose debris, and restore the truck path for pickup.
Driveway width, on-street parking, alleys, gates, and lot depth can change block by block. The address and placement photos matter across:
Project addresses outside Imperial Beach should use the relevant city or regional guide rather than assuming the same local steps.
Most of the request is debris, capacity, weight, access, and dates. Permitted construction closeout and public-space placement can add a separate City step.
The City says some projects require a C&D Waste Management Plan and identifies a 65% diversion requirement for mandated work. Confirm current applicability for the permit scope and retain any required records.
Read City C&D guidance ↗The City says an encroachment permit is required for work in its right-of-way or a City easement. Check the exact location before scheduling a container that would extend beyond private property.
Review the permit page ↗Send the project address, the full material list, an estimate of the amount, the work stage, the intended set-down area, gate and access measurements, and preferred delivery and pickup dates. Photos of the debris and driveway can help explain volume and clearance.
A focused room or garage cleanup may start with 15 or 20 yards. Multi-room, move-out, estate, or whole-property cleanouts may need 30 or 40 yards. Count bulky furniture, shelving, boxes, and bagged contents because those items use container space quickly.
List each material and the phase producing it. Cabinets, drywall, flooring, lumber, roofing, packaging, and fixtures combine volume and weight differently. A 20, 30, or 40 yard comparison may fit general project debris, but dense or weight-sensitive material needs a separate review.
Eligible clean concrete, soil, rock, asphalt, brick, pavers, stone, and tile may go only in a reviewed 10-yard lowboy. Never load them in a 15-, 20-, 30-, or 40-yard general-debris dumpster or mix them with household contents, wood, roofing, green waste, or construction debris.
Describe branches, brush, leaves, sod, fencing, planters, and hardscape separately. Dirt, soil, rock, concrete, asphalt, brick, and masonry may go only in a reviewed 10-yard lowboy and cannot be mixed with green waste, wood, or general debris.
The exact address, selected capacity, material category, estimated weight, requested rental window, and set-down or access conditions all shape the project-specific quote. Share the full scope before relying on a general rate or choosing a size from volume alone.
Measure the usable length and width, the narrowest gate, the full approach, turning space, slope, overhead clearance, and surface conditions. Move vehicles and equipment, mark the placement point, discuss surface protection, and keep the same access lane open for pickup.
The City says an encroachment permit is required for work in the City right-of-way or a City easement. Before scheduling any street, sidewalk-edge, parkway, or other public-space placement, confirm the current requirements for the exact location with the City.
The City says some projects require a Construction and Demolition Waste Management Plan and identifies a 65% diversion requirement for mandated work. Confirm whether the current rules apply to the project’s permit scope and keep any required recycling and disposal records.
Use the form to securely submit the address, size preference, debris type, amount, timing, and access notes to Haul'n Off’s CRM for staff review. Submission does not itself confirm service, price, inventory, timing, delivery, or permit status.
Use the project check to compare the five sizes against the actual load and placement conditions. Review the project-specific terms before scheduling.
